Frame plug anchor for concrete and masonry 08 November 2017

Klimas Wkret-met’s frame plug, KPS-FAST 8 with flanged hex head screw, is an anchor for multiple use in concrete and masonry for non-structural applications and can provide push-through installation for various elements such as blinds, sunshades, kitchen units, shelves, brackets, and lighting fixtures.

KPS-FAST 8 can be used in a variety of different substrates including concrete, solid clay brick, perforated clay brick, as well as autoclaved aerated concrete. The frame plug fixing is equipped with TX drive, which ensures optimum transfer of torque. An SW-10 hex head allows the tightening of the screw with given force (e.g with torque wrench). Reduced thread provides precision of installation of the screw and increased expansion force in the second expansion zone.

The product is characterised by high technical parameters – for example it offers characteristic resistance for use in concrete pull-out failure of 4.5kN (for concrete C16 / C20), and a characteristic bending resistance of 14Nm in concrete. The sleeve is also produced using the highest quality nylon. 

KPS-FAST 8 is available with three types of screw: Zinc plated screw (KPS-FAST 8 K), A4 steel screw (KPS-FAST 8 K A4 – produced to order) and hot-dip galvanised screw (KPS-FAST 8 K OO – produced to order). 

Editor

Will Lowry Editor t: +44 (0) 1727 814 509

Biog

Will joined Fastener + Fixing Magazine in 2007 and over the last 10 years has experienced every facet of the fastener sector - interviewing key figures within the industry and visiting leading companies and exhibitions around the globe.

Will manages the content strategy across all platforms and is the guardian for the high editorial standards that the Magazine is renowned.