Adhesion Technologies develops solution for FRP composite moulded parts 03 October 2019

Adhesion Technologies Ltd (ATL), a specialist UK fixing systems producer, has launched its latest fastening solution primarily designed and engineered for FRP composites – the Fiba Spida™ – an all-in-one fastener and ‘tow steered’ reinforcement fabric fixing system.

Giving designers and manufacturers of glass and carbon fibre FRP moulded parts more design freedom than is possible with alternative fixing systems currently available, the Fiba Spida™ also helps save production time and boosts output rates. The system is also effective for other structural materials including metals, woods, plastics and concrete.

Fiba Spida is based on ATL’s proven Spida™ fixings and proprietary adhesion enhancing technologies, and similar to ATL’s other innovative products can be used by OEMs and tier 1 industrial companies, as well as sold via trade and retail outlets for new build, repair, maintenance and self-build DIY projects. The most popular Spida fastening is the M bolt type threaded stud and nut system, but Spida is a universal fixing system supporting studs, nuts, spacers, conduit strapping, spikes, cable trees, cable, and embedded electrical circuits.

The design and technologies used in Spida and Fiba Spida fixings enables applied stresses to be spread across a larger part of the substrate, so smaller and fewer fixings can be specified in some applications in order to reduce the overall weight of an assembled component.

For composite part producers in particular, the new range of Fiba Spida fixings, with glass and carbon fibre options, offer significant design, productivity, production, cost reducing and performance enhancing benefits. These compelling benefits have already attracted growing interest in the last three years from buyers and design engineers in the rail, mining, automotive, marine, medical equipment and industrial market sectors, where Spida fixings are already specified and being supplied.

Built-in fabric ‘hybrid’ fixing system
This new product development combines ATL’s proven Spida stud, parabolic base fixing system and patented AdMaxTM base surface area enhancing treatment, which provides a stronger resin bond, with the new ‘tow steered’ technology – the ‘Fiba’ part of this new fixing system. The innovative ‘tow steering’ production system avoids cutting the glass or carbon fibres by guiding the fibre tows around either a metal or engineering plastic threaded Spida bolt/stud, maintaining the maximum possible reinforcement strength from the fibres.

The next production step is to high pressure inject a compatible resin, which encapsulates the Spida bolt/stud, base and ‘locks in’ the glass or carbon fibre fabric option to produce the final Fiba Spida fixing; depending on the application, either a single or double fabric layer for interleaving can be produced. The overall result is a high performance ‘hybrid’ fixing system with a built-in quadraxial fabric reinforcement system, which is able to handle considerably higher tensile and torsional loads as point loads and cluster stresses in the fabricated component are dissipated over a much wider area.

Versatile fixing system
Fiba Spida fixings are supplied fully assembled and are very versatile, being suitable to apply fixings in a new build component or to upgrade fixing requirements as part of a maintenance, repair or refurbishment project. Fiba Spida has been designed so that a fixing can be quickly and accurately positioned in a mould during the dry layup pre moulding stage, with no additional preparation needed. Alternatively, it can be bonded or overlaminated to the surface of an existing moulded part needing fixings.

Fiba Spida has solved a number of challenging fixing applications, such as how to apply a fixing onto a thin, honeycomb sandwich laminate under 200g, where using a traditional drilled screw, helicoil, potted insert or bonded base/stud fixing would not work in practice, as typically the top skin is pulled off under load. Unlike other fixings, due to its load spreading design, when a load is applied to Fiba Spida fixings bonded or laminated onto the honeycomb sandwich laminate, the surface skin does not pull off.

For use with other structural materials, such as wood and metal, Fiba Spida fixings can be secured onto the outer surface, where needed, by over moulding using a compatible thermoset resin for the glass or carbon fibre fabric and the substrate. For building and construction applications, Fiba Spida fixings can be dry positioned and permanently set into or onto concrete.

Tow steered technology benefits
ATL’s automated tow steering patented production method avoids damaging the glass or carbon fibres by moving fibre bundles apart to create the fastening stud hole rather than drilling or cutting; according to ATL sourced data, drilling a 5mm rivet hole severs 96,000 stress dissipating filaments per 1,000g of fabric. The integrity of the original long fibres is maintained, avoiding weak spots and any loss of reinforcement performance, enabling a Fiba Spida fixing to cope with higher stress loads.

The tow steering method of producing Fiba Spida fixings enables ATL to offer designers and manufacturers a higher performing, alternative mechanical fixing solution, which not only significantly increases productivity, but can also reduce weight and material costs. This is because, for many designs, fewer fastening points, smaller studs and bases, and less fabric, are needed with the right Fiba Spida fixing, compared to using hole punched, cut or drilled reinforcement fabrics in combination with a conventional welded stud and base fastening of equivalent specification.

Fastening material options
The Fiba Spida product range offers design engineers a choice of high performance specification metal and plastic fastener materials, along with a quadraxial stitched fabric (from 600g) in either carbon or e-glass fibres to suit resin types and application needs. All Spida studs, threaded standoffs and bases can be used separately or as a complete fixing. The current Fiba Spida standard range is available in M4, M6, M8, M10 and M12 threaded stud/nut diameters in combination with a standard 53mm diameter (1.8mm thick) base, available in three standard cold formed metal options: Brass; passivated 316L stainless steel (austenitic marine grade); zinc-nickel plated, heat treated (20MnB4/CR4 rated) carbon steel. Standard stud lengths range from 20mm to 60mm.

Adhesion Technologies operates a highly flexible production service able to cope with manufacturing bespoke fixings. Order quantities are dependent upon the design and material specification required, with limited volume orders accepted to support new product development projects. On request, customised Fiba Spida fixings in M14, M16 and M18 stud/nut sizes, custom lengths and base sizes other than 53mm, as well as in other materials to suit specific applications can be made to order. Alternative material options include aluminium, titanium, titanium alloy (Ti/Al) or UltemTM polyetherimide (PEI) engineering plastic.

Glass and carbon fabric options
In order to provide standard Fiba Spida fixings with optimal stress dispersion capabilities, after extensive prototype testing, ATL specified glass or carbon quad-axial fabric options, both with stitched layers of parallel fibres laid in four orientations (0º, +45º, 90º and -45º), 120mm x 120mm, 120mm x 240mm and 200mm x 290mm are the standard Fiba Spida quadraxial reinforcement fabric size options. Other sizes, custom shapes and alternative fabric configurations are available to order. All fastenings and fabrics have full QC traceability and can be supplied with certificates of conformity.

Proven Spida fixings technology
ATL’s established range of metal and plastic Spida fixings are the outcome of more than five years of research and development work to find better, stronger solutions for the modular assembly of fibre reinforced composites, metal and engineering plastic parts. The R&D carried out to develop the strongest metal Spida fixings established that autogenously welding the stud to the base maximised the ultimate breaking load performance of this critical joint; this welding technique used for all steel fixings has been used by Adhesion Technologies for many years and perfected for the Spida production line.

The proprietary design and adhesion technology used for Spida fixings creates a much higher strength bond with a wide range of substrates. This includes the optional proprietary AdMax surface treatment, which is standard on Fiba Spida fixings; having the AdMax coating increases the bond surface area, adhesion surface energy and wicking properties, so significantly improves the bond strength. The overall adhesion performance can be up to 56% greater than alternative solutions. Application of the Admax coating also increases metal strength and density, ensuring a stronger fixing.

Spida bases also have a number of key design features to further improve adhesive performance. These include castellated anti-torsion edges, which enable the adhesive to form lugs, and the castellated edge design providing 24% greater torsional resistance strength than circular fixings. The concave shaped inner section of the base design provides a ‘micro chamber’ in which the long chain molecules of the adhesive can orientate from zero to 180 degrees during curing, resulting in enhanced peel, shear, torsion, cleavage, tension and compressive loading capabilities.

The overall result is a significantly stronger method of mechanically joining metal, composite and other engineering materials together with enhanced peel, shear, torsion, cleavage, tension and compressive loading capabilities.

This is supported by validated data, following a long-term performance testing program carried out by approved global fastening component suppliers: Barton Cold Form, Australian Parts & Equipment and at the Research Institute for Industry (RIfI) at the University of Southampton.

Content Director

Will Lowry Content Director t: +44 (0) 1727 743 888


Will joined Fastener + Fixing Magazine in 2007 and over the last 12 years has experienced every facet of the fastener sector - interviewing key figures within the industry and visiting leading companies and exhibitions around the globe.

Will manages the content strategy across all platforms and is the guardian for the high editorial standards that the Magazine is renowned.